Yennefer in Purple - Hueforge Print
Description
**Yennefer of Vengerberg - from the Netflix Witcher Season 3** Note: The roll of Fuschia colour that I have prints purple when it's a thin layer over black, hence why the print looks purple. If you have an actual purple filament, it will be safer. The included stl file is for a 97x97mm print, however I printed it at 200mm x 200 mm. You can adjust this in your slicer but **BE CAREFUL** to **NOT** have 'Uniform Scale' tickedm otherwise it will also scale your z height and you don't want that! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm **Filaments Used:** - PLA Siddament Black Transmission Distance: 0.2 - PLA+ Sunlu Fuschia Transmission Distance: 6.8 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Sunlu Lilac Transmission Distance: 6.6 - PLA Sunlu Beige Transmission Distance: 8.2 **Swap Instructions:** - Start with Black - At layer #16 (1.36mm) swap to Fuschia - At layer #20 (1.68mm) swap to Beige - At layer #28 (2.32mm) swap to Lilac - At layer #29 (2.4mm) swap to Beige for the rest. Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Statistics
Likes
3
Downloads
4