OneWheel Pint X VESC Spintend Ubox 80v 100A RGB LED Footpad Mount
Description
Cleaned up model. Changed wire routing thingy to a zip tie mount which should require no supports. Removed phase wire mount area (which I found to be unnecessary). Added mount for LED PCB for the footpad status bar. RGB LED strip: https://www.aliexpress.us/item/2251832264746913.html Step Down Buck Converter 12v to 5v 3A:https://www.aliexpress.us/item/3256802660283967.html Then ESP32/UART to CAN chip/5v logic level shifters, etc to drive LEDs with rESCue firmware.
Statistics
Likes
0
Downloads
1