MDR/MDRX FE to SE Ejection Cover and Dust Cover
Description
This is a MDRx Forward to Side Ejection Plate cover. This is designed to reduce complexity of the system as well as keep dust and debries out. This is caliber agnostic and works for both intermediate and full power cartridges. It is ambi dextrious both in dust cover direction and fitment. Print: 1x Dust Cover Retainer 1x SE plate 1x Slider 1x Spring Guide 1x Switch Purchase: 1x 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 1/2" Length Black Oxide Plastic Screw https://www.amazon.com/dp/B00GDYNQBM?psc=1&ref=ppx_yo2ov_dt_b_product_details 1x 6mm x 1mm x 20mm Spring https://www.amazon.com/dp/B0C33B3PN9?ref=ppx_yo2ov_dt_b_product_details&th=1 1x AR10 Dust Cover This has been tested with both the Guntec Dust Cover and Strike Industries dust covers https://www.opticsplanet.com/guntec-usa-ar-10-lr-308-ejection-port-dust-cover-assembly.html https://www.opticsplanet.com/strike-industries-ar308-enhanced-ultimate-dust-cover.html Assembly: 1. Gather above parts 2. Test fit Switch into Slider for fitment. If it doesn't fit sand the switch ears until it does. Usually this is the back side of the ears towards the rear of the slider 3. Insert Spring onto Spring Guide 4. Flip SE plate until you see the bottom side 5. Insert Spring and Spring guide into Slider, spring guide base away from slider 6. Insert Slider, Spring, and Spring Guide into SE Plate 7. Flip over the SE Plate and insert the switch into the recesses in the slider 8. Screw in Switch 9. Install Dust cover per dust cover instructions keep in mind which side you wish it to be on 10. Push Switch Forward and insert Dust Cover retainer. This is required if you use a standard dust cover with a rod. Note, you do not need the C Clip. The switch when released will retain dust cover retainer Installation: Push the Slider Switch Forward, install, and release. You may need to sand various parts for fitment. This is V4 of the Design. IPT's attached for modification. Drawings of the Spring and Fastener are attached for reference. Links for images/videos here https://imgur.com/a/byXnXiL
Statistics
Likes
1
Downloads
5