Peristaltic pump for water and beverages
Description
You also need the following: -Bearing 8x22x7mm, x5 -flexible aquarium hose 4x6mm, 1m -M3x25mm bolzs and nuts, x4 To get the bearings on the "Lagernehmer", you can use a vise. Getting the hose in the "Gehäuse" is a bit tricky. The pictures with the blue faces represent the orientation on the buildplate. Orienting it like this, you don´t need any supports ot brims or anything. A buildhight of 0.2mm is sufficient.
Statistics
Likes
0
Downloads
13