Adjustable Foot for DIY Pinball Leg / Table Leg
Description
My homemade pinball machine is 1/2 size so standard legs would not fit. I fashioned legs out of 1" aluminum angle stock and made these feet so that I didn't scratch the surface and so I could adjust the height like a real table leg. You'll need: 1" aluminum angle stock per leg 4) leveling feet w/ 3/8" threaded shaft - like these: https://www.amazon.com/Leveling-Adjustable-levelers-cabinets-Furniture/dp/B096G1TKKS/ref=sr_1_15?crid=1QW73IY0Y5RMH&keywords=3%2F8%22%2Bmetal%2Bleveling%2Bfeet&qid=1694438160&sprefix=3%2F8%2Bmetal%2Bleveling%2Bfeet%2Caps%2C107&sr=8-15&th=1 2) 3/8" nuts per foot, one for the bottom capture, one for the top to jam it in place Put a dab of hot glue in the slot and then insert yer aluminum angle The adjustable feet are probably cheaper at Home Depot. See Post-printing pics for assembly and real life application
Statistics
Likes
0
Downloads
0