Filament runout sensor mounting bracket ender 3 V2 (NEO)
Description
Use with M3 bolts that grip in the mounting hole, or use a M3 self tapping screw, that should also work fine. Designed this to mount a simple runout sensor from Aliexpress: https://nl.aliexpress.com/item/33053134385.html?spm=a2g0o.productlist.main.15.351e6d09401RwB&algo_pvid=b4076b87-673d-4853-a39d-58f6485cf210&algo_exp_id=b4076b87-673d-4853-a39d-58f6485cf210-7&pdp_npi=4%40dis%21EUR%212.14%212.01%21%21%212.25%21%21%4021038eda16945417467503357e14b9%2112000028969959871%21sea%21NL%210%21AS&curPageLogUid=wFua9leyX0IW https://nl.aliexpress.com/item/1005003291945477.html?spm=a2g0o.productlist.main.17.351e6d09401RwB&algo_pvid=b4076b87-673d-4853-a39d-58f6485cf210&algo_exp_id=b4076b87-673d-4853-a39d-58f6485cf210-8&pdp_npi=4%40dis%21EUR%212.35%210.47%21%21%212.47%21%21%4021038eda16945417467503357e14b9%2112000027102448801%21sea%21NL%210%21AS&curPageLogUid=pSH17zx2oFYI https://nl.aliexpress.com/item/32967361574.html?spm=a2g0o.productlist.main.31.351e6d09401RwB&algo_pvid=b4076b87-673d-4853-a39d-58f6485cf210&algo_exp_id=b4076b87-673d-4853-a39d-58f6485cf210-15&pdp_npi=4%40dis%21EUR%211.49%211.27%21%21%211.56%21%21%4021038eda16945417467503357e14b9%2166567111105%21sea%21NL%210%21AS&curPageLogUid=ZO3bIm6ZuUt5 https://nl.aliexpress.com/item/32884936454.html?spm=a2g0o.productlist.main.41.351e6d09401RwB&algo_pvid=b4076b87-673d-4853-a39d-58f6485cf210&algo_exp_id=b4076b87-673d-4853-a39d-58f6485cf210-20&pdp_npi=4%40dis%21EUR%214.62%212.27%21%21%214.85%21%21%4021038eda16945417467503357e14b9%2110000000574720465%21sea%21NL%210%21AS&curPageLogUid=CSyw1Ph5piVu Plenty of examples. I think it's pretty standard. I printed it with standard supports touching build plate and the opposite side of te opening that fits onto the printer onto the buildplate. That way there is very little support needed. See images taht illustrates my printing orientation. 0.2 layer height works, but I wanted it to be smooth so I used 0.16.
Statistics
Likes
0
Downloads
1