Wolf in Drip Style - Hueforge Print
Description
**Wolf in Drip Style - Hueforge Print** The STL is in the .zip file as the size exceeded Thingiverse's limits. I have also included a generic .3MF file. I printed this on a Bambu Lab P1P. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm **Filaments Used:** - PLA+ Overture Dark Blue Transmission Distance: 1.8 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA+ Sunlu Fuschia Transmission Distance: 6.8 - PLA Sunlu Lilac Transmission Distance: 6.6 - PLA eSUN PLA Matte Light Pink Transmission Distance: 2.8 - PLA META Sunlu White Transmission Distance: 9.6 **Swap Instructions:** - Start with Dark Blue - At layer #10 (0.88mm) swap to Teal - At layer #15 (1.28mm) swap to Fuschia - At layer #16 (1.36mm) swap to Lilac - At layer #22 (1.84mm) swap to Light Pink - At layer #25 (2.08mm) swap to White for the rest. Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Statistics
Likes
2
Downloads
31