AllStarLink Node Project Box Mounting Plate
Description
This plate is designed to mount a Raspberry Pi, Baofeng 888 and buck converters to a project box. **[Fielect 6.69" x 5.12" x 2.17" Dustproof Electronic Junction Box Plastic Enclosure Project Box for Electronic Projects ABS Gray](https://www.amazon.com/gp/product/B07ZRFMF82/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1)** This was inspired by a build series from 2EOBMT. See his video **[Here](https://youtu.be/7L5FZrcyw7M?si=gwNRcJUK-tkIdqZY)**. If I would do it over again I might choose a slightly larger project box. There isn't a lot of space for the switches, power plug and SMA connector. You may have some interference issues. Dry fit the parts and determine your layout before drilling holes in the panel. Think about your order of operations when assembling the unit. Some screws/bolts will be inaccessible once a part is attached to the plate. I choose to stack the 2 buck converters on top of each other so the adjustment screw for the bottom buck converter will not be accessible. Verify it's output before attaching the top buck converter.
Statistics
Likes
0
Downloads
1