Zenfone Max Pro M1 Case - Heavy Duty
Description
Zenfone Max Pro M1 case protection, military style. Is composed by two parts, the inner printed in TPU and the outer in PLA, PTG. I chose to print with TPU 85A and PLA but filament with better temperature characteristics would be more appropriate. Fixing is done with 6 M2.5 screws and 6 insertable nuts. The screw heads must be adjusted to a diameter of 4.5mm. This is easily done using a drill and a file. I printed the TPU with 20% infill and zero layers on both top/bottom sides to make the piece more elastic. Note: The model was tested on a real phone.
Statistics
Likes
0
Downloads
0