Female XT60 connector
Description
Seems That There Wasn'T Any On Thingiverse. So I Found One Here Https://Grabcad.Com/Library/Xt-60-Female-Connector-1 And Made Stl. You Need To Drill Holes With 4.5Mm Bit And Slightly Enlarge Back Side Of Holes, Say 5.5-6Mm Bit Few Mm Deep. This Way 3.5Mm Bullets Go In Easily But You Have To Push/Hit These All The Way In So They Stay Secure. Seems To Fit Male Connector Quite Tightly. If It'S Too Tight Scale Down By Few Percent.
Statistics
Likes
227
Downloads
0