MakeItFloat Boat-Rig
Description
Hi Folk I Like Challenges, So I Decided To Join The S.T.E.A.M. - Makeitfloat This Is My First Challenge Thingiverse. So I Started With My Colleague To Find A Good Mix Of Real Solutions For Transport Of Heavy Wight. We Found Something. This Is The First Concept Or Our Total 3 Ideas For This Challenge. Hopefully We Have Enough Time To Generate, Print And Test All 3 Concepts. Focus On This Concept: 1. Print Less Parts And Support Structures As Possible 2. Carry Heavy Load -> 2 Euro Coins (Diameter: 25,75 Mm, Thickness: 2,20 Mm, Weight: 8,50 G) 3. Priority: Load > Design 4. Must Be Moveable In Real Test At First I Decided To Generate Some Boxes For The Coins. 10 Coins Will Fit Into A Red Box At The Moment. Boxes Can Be Stacked Together Later. I Want To Print This On A Print Area Of 200X200X180Mm With Pla. Files, Instructions For Assembly And Print Settings Will Come In The End. End – 19.06.2015 Update Update Of Concept Stl File Prepared Motor Added (Rubber Band Solution) Now, I Need To Print And Test :) 23.06.2015 Update Printed The Main Parts And Test It. So The Design Is Not The Best :/. It Swim But Is Not Stable In The Water. So I Need To Modify The Design. - 04.07.2015 Update Time Is Running. Time Is Over. So I Tryed But It Doesn´T Worked As I Want. It Swim But Not Stable. So. It´S The End Here. The End - 19.07.2015
Statistics
Likes
9
Downloads
0