Hori Hayabusa Octagonal Gate Reduced Throw
Description
#Hori Hayabusa Octagonal Gate Reduced Throw Remix of [HORI Hayabusa octogonal restrictor gate](https://www.thingiverse.com/thing:5902156) with the throw (edge-to-edge) being reduced by different amounts. Useful if you feel like there's too much post-travel after the switch was engaged, before the actuator hits the wall of the restrictor gate. #Main differences: * Shrinked restrictor octagon by the amount denoted in file names (0.0-3.5mm) * Adjusted the slant of octagon inner walls accordingly for maintaining flat contact with the actuator * Rounded octagon's corners a little more, making it closer to KOWAL's version * Reinforced main opening walls with bevels on corresponding ribs * Added slight bevel to both sides of the main opening #Compatibility Compatibility varies greatly depending on your printer tolerances and the actuator you use. I've tested 1.5mm version with sanwa's [official blue oversized actuator](https://i.imgur.com/qZIBFpz.png) and it seems to work well. I would suggest starting with 1.0mm and going up by 1mm untill you notice the lack of diagonals, then move 0.5mm back and see if it feels better. If you have multiple actuators test them as well, since JLF-style actuators have two parts each of which responds to activating a switch and limiting the throw movement. ##If you find out the actuator/reduced throw combination that works, please post a make or a comment so that I could update the following chart. ``` Version(-mm) Compatible With 0.0 Stock 0.5 ? 1.0 ? 1.5 Sanwa Blue 2.0 ? 2.5 ? 3.0 ? 3.5 ? ```
Statistics
Likes
0
Downloads
0