AW hi capa picatinny rails
Description
Picatinny rails, top and bottom, for ArmorerWorks Hi Capa 5.1 (does not fit others). WIP: adding a hole to fit a pin on the bottom side, so it won't slide off. In the meantime, drill a hole. ## printing Print it on the non-picatinny sides. Use supports. Set wall thickness to 0.8mm and at least 2 for wall line count. Support infill: 5%, so it is easier removed. Printed it in standard quality with only the settings above.
Statistics
Likes
0
Downloads
0