Pin in Block (Brainteaser)
Description
Enspired by the model from <a href="https://www.printables.com/model/595639">Botaz at printables</a> I made the trick durable and easy to print. Also put the pin outside the block so you can easy print in different colors. Printing (in <b>PLA!</b>): Block: Layer 0.2 / Nozzle 0.4 / Perimeters:8 / Infill 100% / no support or brim / Print flat as postioned in the STL Pin: Layer 0.2 / Nozzle 0.4 / Perimeters:5 / Infill 100% / no support or brim / Print with the head on the bed as positioned in the STL It's a modern approach to the classic nail thru wood trick. To get the nail inside you have to steam up and bend the wood. With this model it's almost the same: PLA gets soft above 80°C... See video how it works:
Statistics
Likes
0
Downloads
0