Cure Turtle V2
Description
This is the big brother version of my original [Cute Turtle](https://www.thingiverse.com/thing:6209023). This one is 50% larger but I made some additional changes to make printing and assembly easier. The eyes and flippers are movable for different poses. This one uses all M3 machine screws which should be easier to source. You will also need a M3 Tap. I printed everything at 20% infill is this worked great. You will need the following printed parts: - 1 x Head Left (also the main body) - 1 x Head right (also the main body) - 1 x Flipper Front Left - 1 x Flipper Front Right - 1 x Flipper Rear Left - 1 x Flipper Rear Right - 4 x Flipper Ball - 4 x Ball Spacer - 2 x Eyeball Sclera - 2 x Eyeball Iris - 2 x Eyeball Pupil - 1 x Eye-Spacer - 1 x Shell Upper - 1 x Shell Lower Left - 1 x Shell Lower right The ball spacer and Eye spacer parts are not visible when assembled so choose any colour for these. I included 2 versions of the front flippers. One has additional supports which I used to help printing. Fasteners needed: **Eyeballs**: 2 x M3 x 15mm **Flippers**: 4 x M3 x 8mm or 10mm **Shell**: 4 x M3 x 10mm or 12mm **Body**" 5 x M3x15mm + 5 x M3 Nyloc nut The Nylon nuts must be 5.5mm across but most are. The assembly of the components should be obvious from the diagrams. The shell does not attach to the body it's simply fastener around it instead. For this version I reduced the eyeball size slightly so they rotate nicely in the head and can be set to various positions.
Statistics
Likes
0
Downloads
0