Suzuki Jimny 2007 cup and central
Description
A PETG part for the central empty space between the chairs and under the handbrake. The part was first sized with laser cutting wood model, and then it was printed for use with a Prusa MK3 with very low infill. The place for the cup holders is designed to fit a further rubber piece made for Tesla center console. The part is a bit taller to press fit in place, however, the extra 2-3 mm didn't do much and only caused a bit of deformation so, I would suggest scaling the whole thing down in the x-y direction. https://www.amazon.sa/-/en/Tersely-Console-Compatible-Storage-Accessories/dp/B0C3VM3HW3/ref=sr_1_8?crid=1A344FWALRYQF&keywords=tesla%2Bcup%2Bholder&qid=1696145617&sprefix=tesla%2Bcup%2Caps%2C189&sr=8-8&th=1
Statistics
Likes
0
Downloads
0