3" cube sci-fi modular terrain 20 - tower
Description
I've been thinking of designing circular tower files for a while now. There's only so many photos of tinned goods on a battlefield you can see before you wonder if there's a better way? It might turn out that there isn't and these files are a waste of time, I'll leave it open to interpretation. The files fit into a cube in all 3 dimensions and you can go as high as you please. There are 2 'square base platform' files; these are just new 'tops' like my other files so the towers can be part of other constructions using my files. There's a standard (round) stacking platform that connects 2 wall sections or can be the top. A selection of platforms which have a gantry around the tower, some with ladder access. The walls are all the same format, plain, 2 doors & 4 windows, all in either plain, corrugated or sectioned. The wall files have little ridges at the top and bottom to locate them with the platforms. The 'old' wall files don't have the ridges so the platforms could turn freely but it makes it harder to line up the gantry files. The gantry files are as big as a 2 cube square but are effectively a single cube top with a half-cube extension all the way around. If there were 2 towers, with a single cube gap between them, the gantries would be in contact to make a single walkway. If there was a 2 cube gap the gantries could be connected with a single cube bridge etc. When printing the platforms it's best to use supports, I printed one and the filament drooped in the groove underneath and needed to be cleaned out before it worked properly. Anyway, see what you think. Additional file links: Ladders https://www.thingiverse.com/thing:5022912 Bridges/Walkways https://www.thingiverse.com/thing:5499089
Statistics
Likes
0
Downloads
0