Halloween Skeleton Witch - Hueforge Print
Description
This is a dual lithophane print, where if you shine a light from behind the print, it will glow. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm **Filaments Used:** - PLA META Sunlu White Transmission Distance: 9.6 - PLA Overture Cream Transmission Distance: 8.4 - PLA+ eSun Grey Transmission Distance: 1.4 - PLA Siddament Black Transmission Distance: 0.2 **Swap Instructions:** - Start with White - At layer #21 (0.96mm) swap to Cream - At layer #31 (1.36mm) swap to Grey - At layer #42 (1.8mm) swap to Black for the rest.
Statistics
Likes
0
Downloads
0