Lion (Realism) - Hueforge Print
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm **Filaments Used:** - PLA Kingroon Black Transmission Distance: 0.4 - PLA+ Esun Brown Transmission Distance: 1.5 - PLA CC3D Orange Transmission Distance: 7.4 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Kingroon White Transmission Distance: 7.8 **Swap Instructions:** - Start with Black - At layer #20 (0.92mm) swap to Brown - At layer #23 (1.04mm) swap to Orange - At layer #28 (1.24mm) swap to Beige - At layer #33 (1.44mm) swap to White for the rest.
Statistics
Likes
0
Downloads
0