Lady of the Sea - Hueforge Print
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm **Filaments Used:** - PLA+ Overture Dark Blue Transmission Distance: 1.8 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA CC3D Orange Transmission Distance: 7.4 - PLA META Sunlu White Transmission Distance: 9.6 **Swap Instructions:** - Start with Dark Blue - At layer #9 (0.8mm) swap to Teal - At layer #15 (1.28mm) swap to Orange - At layer #27 (2.24mm) swap to White for the rest.
Statistics
Likes
0
Downloads
0