Ord Bot extruder groove mount
Description
This Thing Is A Mount For "Standard" Groove Extruder Cold Ends. (Untested) I Drew This From Online Specs For The J-Head Groove, But I Just Measured My (Non J-Head) Cold End And Its Groove Is 5.1Mm Wide While The Reference For J-Head Looked Like 4.6Mm. This Thing Has A Bevel On The Groove Holder, But The Entire Groove Holder Is 4.6 At Its Widest. This Might Allow A Little Play In The Mount, But It Should Be Ok Since The Grip Should Be Tight. I'Ll Test And Update Here.
Statistics
Likes
3
Downloads
0