Trapped - A Creepy Halloween Lithograph
Description
This is an easy to print model, but is quite visually striking. Prompted from Stable Diffusion, and lithophaned in HueForge, it seems to come alive with a creepy, disturbing life of it's own. 200x200mm with a modular frame. Should scale a bit in x&y but the 'pixel' resolution is 0.4mm, so much smaller and it will loose clarity on a 0.4mm nozzle. 0.4mm nozzle, print the first layer at 0.16mm then 0.08mm for the rest. The 4.2mm thick one is shown here and is optimal for this Sunlu PLA with a transmission distance for HueForge of 3.4, but there is a thinner one at 3mm if your filament is more resistive to light passing through or your light source is dimmer.
Statistics
Likes
127
Downloads
902