Spool Holder with 608ZZ bearings for 8mm screw / rod ( replacement for Creality CR 10 Smart )
Description
You will need: 2x 608ZZ bearings 1x M8 screw 100 mm 1x M8 nut *********************** Just insert the two 608ZZ bearings on each side of the tube, close both sides with the cap and the locking mechanism, insert the 100 mm M8 screw on one side and the M8 nut on the other side, tighten the screw by twisting the locking mechanism and holding the cap, don't overtight so the tube can roll freely .... done :D
Statistics
Likes
0
Downloads
0