Compact Wooden DND Box/Tower/Tracker
Description
I wanted a compact DND Box with Dice Tower and Trackers all built in, so I created one. It all slides together into one compact unit. The Dice Tower and the Trackers slide out and there are holes for 4mm x 2mm magnets to keep them locked when storing/transporting. I also gave this one a faux wood finish because I liked the way it looked. I am working on ones possibly with a stone finish and a steel box finish. I printed the one pictured at 0.15mm Layer height, but I have also printed one at 0.2mm layer height that fit together perfectly fine. Overall dimensions are 168mm x 116mm x 33mm - Dice Box - Has compartments for Dice, MiniFigs, Pegs, and a Dice Tray (small) Dice Box Dimensions: 116mm x 116mm x 33mm Internal dimensions are: Dice Compartment - 60mm x 65mm x 28mm Dice Tray - 83mm x 44mm x 28mm MiniFig Compartment - 60mm x 39mm x 28mm Peg Compartment - 21mm x 44mm x 28mm - Dice Tower Dimensions: 116mm x 54mm x 33mm - Lid/Tracker Dimensions: 112mm x 114mm x 5mm Spell Slots - Levels 1 thru 9 Death Saves Hit Points - Counters 1 - 999 Inspiration - 6 slots for those who use more than one point Misc - 10 slots for tracking things like luck, tokens, etc. - Assembly Instructions: Pretty easy to assemble. Slide the pieces together. Slides may be a little tough to slide together at first, just slide them in and out as much as needed until they slide in and out smoothly. For the magnets you may need to get a 4mm drill bit (or a knife if you are brave) to make sure the holes are 4mm wide, but I have not had to do this much - usually they just push into place using plyers - the big trick will be aligning the magnets correctly so they grab each other.
Statistics
Likes
0
Downloads
1