ZuluSCSI RP2040 (Rev 2022d) 3.5" inch Enclosure
Description
Custom 3.5" PC front panel bay case for the very much versatile ZuluSCSI RP2040, mine is specifically Rev. 2022d; a really well thought out and very usable piece of hardware, especially for old PCs and Macs. Features the following "mods", a BOM of sorts: *) 25-pin D-SUB female SCSI port *) Slot for back ports; 50-pin flat-cable & 3.5" floppy molex power *) 2 pcs of push-buttons *) SD-card slot *) Slot for onboard MicroUSB female *) Additional activity-LED *) Top-side honeycomb mesh for a 30mm speaker driver (probably also could work as a vent for the RP2040 CPU?) *) Top-side slot for maneuvering the onboard switches *) Mounts together with 4 screws from your own hoard/collection, I have no exact measurements (as I indeed am a hoarder...) As the board itself can be powered out of SCSI termination power and the D-SUB is welled, the case works inside as well as outside the computer. I don't know how well the case would line up inside, say, a synthesizer or other appliances with fixed SCSI interfaces, sorry. As you can see in the picture, my own lid is slightly misaligned, the attached .stl-files are however fixed. Or let me know...
Statistics
Likes
0
Downloads
0