Conduito - 2" Cable Grommet
Description
Cables everywhere: Behind the desk, in the TV shelf, or in the bookcase. They not only cause a mess but can also easily get tangled or damaged. This is where Conduito comes in. This cable grommet was designed to safely and neatly guide cables through furniture panels, combining functionality with a well-thought-out design. Conduito is available for a variety of hole diameters, from 1 3/8 inches to 4 3/4 inches, including common sizes like 1-3/4, 2, 2-1/2, 3-1/8, 3-3/4, and 4 inches, as used by Forstner drills, for example. Calculating the diameter of the cable grommet is straightforward: hole diameter minus 0.39 inches. The panel thickness should be at least 0.59 inches. The complete information about this project is available on its dedicated page in my Wiki. If you like my work, please hit "Like", consider supporting me with a donation, and don't forget to follow my profile. Wiki (English): https://wiki.creolet.com/en/projects/conduito-cable-grommet Wiki (German): https://wiki.creolet.com/projects/conduito-cable-grommet The provided print files are designed for a hole diameter of 2 inch. Conduito is available in various imperial sizes, specifically 1-3/8 inch, 1-1/2 inch, 1-5/8 inch, 1-3/4 inch, 1-7/8 inch, 2 inch, 2-1/8 inch, 2-1/4 inch, 2-3/8 inch, 2-1/2 inch, 2-5/8 inch, 2-3/4 inch, 2-7/8 inch, 3 inch, 3-1/8 inch, 3-1/4 inch, 3-1/2 inch, 3-3/4 inch, 4 inch, 4-1/4 inch, 4-1/2 inch and 4-3/4 inch. For download links and further details, please refer to the Wiki links provided in the previous section. --- Drill hole diameter: 2 inch --- The print settings provided here are designed for a 0.4 mm nozzle and a layer height of 0.2 mm. The settings can be easily found in most common slicing programs like Cura, PrusaSlicer, or BambuStudio/OrcaSlicer. * Slicer Unit: Metric / mm * Wall generator: preferably Arachne * Walls: 3 * Top layers: 5 * Bottom layers: 5 * Infill density: from 20% * Infill pattern: Any
Statistics
Likes
0
Downloads
0