Filament Guide (608Z)

Filament Guide (608Z)

Description

I love the Filament Guide by DanTech https://www.thingiverse.com/dantech/designs But since i didn't have any airsoft BBs, but i did have some 608 bearings.... Omissions I never bothered remaking DanTech's 2020 mount. So you'll need to grab that and a nut for it. Compatibility Arms- Yes (both ways) Nuts & bolts- No Quirks The bolts & arms are labeled in a way that makes sense to me but maybe only me. Example; Guide bolt (2arm 50mm) Bolt for a 50mm wheel with a guide. That needs 2 arms for proper spacing (my L bracket and DanTech's L bracket [v4] or S_arm count as a "arm"). End Arm count a 2 "arms" for the filament wheel side. Another quirk of the bolts, is they snap easy, A side effect of only being able to make them 7.8 mm. I recommend printing them at 80%+ infill and letting them cool before assembling. Assembly The washer needs to go between the arm and the bearing so it can spin freely. Besides that Go Nuts. I tried to make enuf parts so you can feed it how ever you want to.

Statistics

Likes

1

Downloads

0