Luffy x One Piece keychain made with HueForge
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm (You can use multiple layer heights up for 0.2mm up to 1.0mm so you save time printing the base) Filaments Used: PLA Sunlu Black Transmission Distance: 0.6 PLA Sunlu Meta Red Transmission Distance: 2.8 PLA Elegoo Yellow Transmission Distance: 3 PLA PolyLite White Transmission Distance: 3.5 Swap Instructions: Start with Black At layer #22 (1.04mm) swap to Meta Red At layer #34 (1.52mm) swap to Yellow At layer #38 (1.68mm) swap to White for the rest.
Statistics
Likes
0
Downloads
1