Sovol SV06 Filament Guide
Description
This is a filament guide for between drier boxes and an SV06. I have the Sovol dual roll drier placed on a shelf over both of my SV06 printers. In order for it the feed without binding I have to make a PTFE tube filament guide. Print the Nut and Insert at a fine layer height (I did .15mm). The SV06 Tube Guide bracket that mounts to the top of the frame requires no supports. Enlarge the feeder hole(s) in your drier box to 31/64" (12.2mm) for the insert part to fit correctly. I recommend threading the insert and nut together with a couple wrenches to clean up the threads so you can hand tighten them when installing on the box. You will need whatever length of 4mm OD / 2mm ID tube that is required for you to have a path that does not have a tight turn out of the box and allows you to open the box with out binding.
Statistics
Likes
0
Downloads
1