ADXL345 Magnetic Bed Mount (10mm x 1mm Magnets)
Description
This is a simple magnetic ADXL345 mount to easily mount your accelerometer on your 3D printer's bed. The ADXL345 should have the header pins soldered on their side, not through the holes on the PCB! Parts required: - 2pcs M3 x 8mm bolts (M3 x 10mm should also work) - 4pcs 10mm x 1mm magnets - Super Glue Simply glue down the magnets, wait for the glue to dry and screw the ADXL345 PCB down using two M3x8mm bolts, they should self-tap easily.
Statistics
Likes
0
Downloads
0