Bear in the Forest - Hueforge Print
Description
A 150mm x 100mm print of a bear walking through the forest. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm **Filaments Used:** - PLA Kingroon Black Transmission Distance: 0.4 - PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8 - PLA+ Sunlu Coffee Transmission Distance: 3 - PLA Kingroon White Transmission Distance: 8 **Swap Instructions:** - Start with Black - At layer #15 (0.72mm) swap to Dark Gold (Dark Brown) - At layer #18 (0.84mm) swap to Coffee - At layer #27 (1.2mm) swap to White for the rest.
Statistics
Likes
0
Downloads
3