Steampunk Plague Doctor - Hueforge Print
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm **Filaments Used:** - PLA Kingroon Black Transmission Distance: 0.4 - PLA+ Sunlu Dark Gold Transmission Distance: 1.8 - PLA+ eSun Grey Transmission Distance: 1.4 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Kingroon White Transmission Distance: 8 **Swap Instructions:** - Start with Black - At layer #8 (0.72mm) swap to Dark Gold - At layer #9 (0.8mm) swap to Grey - At layer #12 (1.04mm) swap to Beige - At layer #18 (1.52mm) swap to White for the rest.
Statistics
Likes
0
Downloads
1