Belt-and-pinion for a standard NEMA motor
Description
This Design Requires 2 X 608 Bearings And Is For A 6Mm Belt. Inspired By Openbuilds And Others Belt-And-Pinion Systems I Created This Design To Experiment With Using This Configuration With Mostly Printed Parts. You Will Need: - 6 X M3 X 12Mm Screws (Can Use Shorter Screws) - 2 X 608 Bearings - (Optional) Metal Washers To Use In Place Of The Printed Ones And For Securing The Whole Thing To The Motor
Statistics
Likes
238
Downloads
0