The Gravedigger - Hueforge Print
Description
This is a hueforge print that utilises filament swapping at different layer heights. An AMS is not necessary, but will be very helpful. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm **Filaments Used:** - PLA Kingroon Black Transmission Distance: 0.4 - PLA Sunlu Lilac Transmission Distance: 6.6 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Kingroon White Transmission Distance: 8 **Swap Instructions:** - Start with Black - At layer #7 (0.68mm) swap to Lilac - At layer #10 (0.92mm) swap to Beige - At layer #16 (1.4mm) swap to White for the rest.
Statistics
Likes
0
Downloads
1