Direct Drive Mod Creality CR6-SE
Description
Hello everyone, This Thing is an Adapter for your Creality CR6-SE to upgrade it to an Direct-Drive-Extruder. The only thing you need besides my File is an Dual Drive Extruder like this one: (Check the last Picture) https://www.ebay.de/itm/285470649247?chn=ps&var=587410038739&_trkparms=ispr%3D1&amdata=enc%3A1fZnOChRDRyy9cCok_fidxQ76&norover=1&mkevt=1&mkrid=707-134425-41852-0&mkcid=2&mkscid=101&itemid=587410038739_285470649247&targetid=1716911581159&device=c&mktype=pla&googleloc=9043016&poi=&campaignid=17943303986&mkgroupid=140642150118&rlsatarget=pla-1716911581159&abcId=9301060&merchantid=730567103&gclid=Cj0KCQjwsp6pBhCfARIsAD3GZuYSSEnFcl1ZGJwTaG2Lp0kAy7RShtKEXLbVv7RGKf83A4q4g-otkYwaAuXnEALw_wcB -------------------------------------Only on the 40x40 Fan Modell------------------------------------------- Also you can add an 40x40 fan on the side of your stepper Motor, i got an Deal on an Noctua, so i used this one but watch out for the Voltages whe you wire it up! STAY AWAY FROM THE SMALL MAINBOARD ON THE GANTRY better get two leads from the Powersuply directly! ------------------------------------------------------------------------------------------------------------------------ Dont forget to take out the small black tensioner thing in the Dual-Drive-Extruder that goes over the Bowdentube, otherwise the Bowden is locked in and the Autolevel will no longer work! Just Print out the Part, assemble the Direct-Drive-Extruder, dial in the new feeding rates and thats it! If you have any sugestions on my file feel free to remix it or to make a comment!
Statistics
Likes
0
Downloads
0