Onefinity Machinist Vacuum Hose Boom
Description
This Boom was inspired by the "Suckit Vacuum Hose Boom" by @makermark (https://www.thingiverse.com/thing:3235016) While being heavily influenced by the above-mentioned item this was 100% designed in Fusion360 by myself. Additional Parts I purchased and designed this around are: 2 - Carbon Fiber tubes ( I cut 2 10" lengths and used one leftover piece for the last extension on the boom): https://www.amazon.com/gp/product/B07V6TRBB1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 2 - bearings that sandwich the "spacer" between the upper and lower base pieces: https://www.amazon.com/gp/product/B082PWQNJB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 16 - 3mm x 15mm or longer dowel pins (I used 18mm as I had them on hand): https://www.amazon.com/gp/product/B07KFL96TQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 4 - m3x35mm screws/bolts 4 - m3 lock nuts 1 - m5x10mm screw/bolt ( I used m5x15mm as I had it on hand) Tolerances for the 3mm dowels were very tight on purpose I required a few taps with a hammer to get them seated. The F3D file is attached if you need to adjust anything for your printer's tolerances. *NOTE* The straps were printed in Overture TPU all other printed parts were made with the specified Polymaker Atikam Blue HTPLA called out in the print settings section. https://www.amazon.com/gp/product/B07VDP2S3P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Statistics
Likes
0
Downloads
1