DT Swiss Squorx Spoke Nipple Driver
Description
Spoke nipple driver for DT Swiss Squorx nipples. For driving the 'special' squorx nipples I made a nipple driver without special parts. The driver consist of a divisable grip and a crank. Additinal parts needed: - 1x Hex bolt M8x60 and (self locking) bolt - 1x Torx screw with TX25 head For driving the nipples I used a Torx screw (5,5x45mm) It needs to have a TX25 head to fit on the nipple. The head of the screw was grinded smaller and glued in the crank with hot glue. A 5,5mm screw could probably screwed in to without hot glue. Mount the crank to the lower part of the grip with a M8x60 bolt (preferably DIN931, with a shank instead of completely threaded). Use a self locking nut or thread locking compound to prevent the nut from loosening. Glue or tape the upper part of the grip to the lower part. Fusion model included so you can adjust it to the nuts and screws in your shed.
Statistics
Likes
0
Downloads
0