Star Wars Rebels Communicator - New Belt Clip
Description
Hey, Just a quick remix of Machinimax's sweet little Rebels Communicator so that the Belt Clip can be slid onto a standard 4" belt using the Covertec Clip Remix from HairBrainedProjects. I also added two flavours of the new Belt Clip with the design from Anakin's Episode III saber switch body just for a subtle little easter egg from CaseStudyno8 Here's the magnets I used in the UK: https://www.amazon.co.uk/gp/product/B0BQ23DQKG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Description from Machinimax: Make your own comlink from the Star Wars Rebels TV series. This was primarily designed with a Kanan Jarrus costume in mind but can be used with any Rebels character as the same model was used by everyone in the show. The files also include a clip for belt wear. A magnet can be installed in both the clip and the grip of the comlink in order to keep the two together and protect any post-processing work. The magnets linked below fit perfectly and can be found at your local Home Depot. Each magnet will need to be secured onto the parts using glue. The images posted are of a fully assembled and post-processed model. The model does not require the use of rafts or supports! Just load into your slicer and print! Comlink measures 3.3 inches in length with a maximum diameter of 1 inch. https://www.homedepot.com/p/MASTER-MAGNETICS-0-3-in-x-0-11-in-Neodymium-Rare-Earth-Magnet-Discs-10-per-Pack-07045HD/202526363 UPDATE JULY 10, 2020 I made a few changes to the design both functionally and aesthetically: Slightly extended the length of the end cap. Added a grove in the end cap based on a new reference image. There are now two pockets for magnets inside the grip to magnetize on both sides. Slightly widened the gap of the belt clip that slides on to the belt itself. The comlink had a tendency to easily get knocked out of the belt clip. Slightly extended the circumference of the belt clip to avoid that. Despite the changes, the new belt clip will still work with the original comlink model if you already printed it!
Statistics
Likes
0
Downloads
0