Mamiya RB67 RZ67 Neck Strap to Peak Design
Description
USE AT YOUR OWN RISK!!! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend it too much. A second very thin part just prevents the pins from slipping out and is not load-bearing. I printed it with PETG, full infill, and randomized seams.I trust it, much better than nothing, but you better not use it to dangle that beastly camera on your hip. How to use: Clip the central hole over the camera peg and guide it to a smaller cirle. Slide a cap over and put a PD thingie over this sandwich,
Statistics
Likes
0
Downloads
0