OneWheel Pint Latching Switch Adapter
Description
Adapts a latching switch to use in the OneWheel Pint for VESC or other purpose. This allows the use of the factory rubber button and without modification to the box. I use an O-Ring as detent to secure it. This means there's nothing to come loose or break inside the box. This may work with other switches but I designed it for this one: https://a.co/d/c8WxmvU DIYhz Push Button Switch, Self-Locking Mini Switches Latching 10mm Round DC24V 0.5A Black Cap I epoxied the switch inside the holder. I also clip the tabs at the back shorter and solder wires directly to them then pot the back opening with epoxy to seal everything in.
Statistics
Likes
0
Downloads
0