Fan Mount + modular tower
Description
This is a standalone dual-sided tower I designed to hold 2 fans. The primary goal was to prevent any more tank rim space from being eaten up by any more devices. I've found this is able to hold an 80mm fan and a 120mm fan. Printed on a P1P with PETG Designed in Fusion 360 .4 nozzle Infill 30% Infill pattern - cubic (I find it does best to support the tubes) 2 raft layers Support not needed for base but are needed for the middle struts and top Ensure the top fan stand is printed on its side so the supports are easier to remove -remove "on build plate only" support option. This needs structural support to print. - I used snug preset with 10% threshold angle I print the connectors standing up, I don't have any stringing issues with the P1P but did experience some stringing with a voron. You can adjust the height of struts to make it fit your needs. Ensure you have enough clearance on top between wherever it is going. The top is 73.7mm while the bottom only needs 70mm of clearance. Feel free to access the STL for adjustments. I've cleaned up the file a bit but it does have my original design in it. Just keep the components you don't want hidden and it'll export fine. https://drive.google.com/file/d/1qvMJ8yj-hwwbJppv0e8pYSFqqieD8h0V/view?usp=share_link
Statistics
Likes
0
Downloads
0