Cheapest UP! / Afinia Enclousre
Description
I'Ve Been Looking Into Some Enclosures For My Afinia H480. Either They Are Way Too Expensive, Have A Huge Materials List, Or Are Just Over Complicated. My Solution, Which Works Great By The Way, Was Just To Use A 27Gal Tub, With Large Enough Inner Dimensions To Fully Enclose My H480. I Crudely Cut Out A Small Hole In The Side, Added Two 0.79 Hinges, Two 0.59 Magnetic Door Stops, And A 1.00 Door Handle. The Tub And Parts Were Found At My Local Home Depot, And In Total Cost About $10. I Have A Slight Overhang Over The Edge Of The Desk, And Obviously The Door Isn'T Air Tight, But It Keeps The Temp Very Stable And My Warping/Heat Bed Issues Have Gone By The Wayside. This Printer Is On My Office Desk, And Has An Ac Vent Almost Directly Above It. I Did Not Want To Move The Printer To Another Room In The House, So I Improvised, And Now My Print Quality Has Drastically Improved. I Know It'S Crude, And Most Items On Here Are Generally Made By Our Printers, But I Wanted To Offer Someone, Who Is Experiencing The Same Issues I Had, A Very Cheap Alternative To A Normally Much More Expensive Solution.
Statistics
Likes
9
Downloads
0