HueForge "Octane"
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA PolyTerra Muted Red Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite Pro White Transmission Distance: 5 Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Muted Red At layer #11 (0.96mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.
Statistics
Likes
0
Downloads
1