Taranis X9D 3S Battery Hatch +10mm
Description
This is a "reworked" version of the battery cover. Unfortunately, the original design could not accommodate the 3s battery, so I had to start from scratch in Fusion 360 and slightly enlarge the original design. Thanks to this, I could convert the old Taranis charging port into a 12V+ output for FPV Goggles or the PINECIL portable soldering iron. Thanks to this, I always have a 12V+ power source at hand :) Battery used: Gens Ace Soaring 2700mAh 11.1V 30C 3S1P Lipo battery - XT60 plug Capacity: 2700 mAh Balance plug: XH Continuous current 30C Dimensions 103x33.5x25mm Maximum charging speed 3C Plug: XT-60 plug (change to XT-30) Voltage: 11 ,1V (3-cell) Weight 190 grams
Statistics
Likes
0
Downloads
3