Sim Racing Dashboard Enclosure for iPhone 7/8/SE 2020
Description
Dashboard enclosure for iPhone 7, iPhone 8 and iPhone SE 2020 for sim racing applications (fully tested on a iPhone 7). I needed a compact and simple, yet realistic looking enclosure to use with my old iPhone 7 on a Thrustmaster T300 wheel base. You will need four M3x18 mm screws (Allen screws preferable) and four M3 nuts (self-locking preferable) for the assembly. I designed this with an inner clearance of 2 mm approximately, this way you can use some felt or thin foam material (1 mm) on each inner wall (see picture), so the iPhone will fit snugly and won't move. I sanded and painted black both pieces for a nicer finish. You can also use some carbon fiber vinyl material on the front piece if you prefer. Both parts were printed with 25% infill with PLA material, no need for supports. I'm using this along with the t300 Acelith holder. Free 3D model here: https://acelith.com/collections/downloads/products/3d-model-smartphone-holder-for-servo-base-dashboard
Statistics
Likes
0
Downloads
1