LED Cob Strip Clips for Caldwell Ballistic Chronograph
Description
I made these clips to hold some cheap LED cob strips on top of the sun shades for low light use. I first tried with some RGB strips that I had, but the LEDs were spaced too far a part and produced mostly errors. Printed in PETG using spiral vase mode at 0.3mm layer height, and with no bottom layers. The LED strip I used is 2mm thick and 8mm wide. Here is a (non-affiliate) link to the exact one I used: https://www.amazon.ca/gp/aw/d/B0C2P8CZBD?psc=1&ref=ppx_pop_mob_b_asin_title
Statistics
Likes
1
Downloads
2