Dewalt Inflator Adapter For Inflatable Kayaks
Description
This inflator adaptor is made for the Dewalt air inflator, model DCC020IB. The output end can connect to an inflatable kayak such as those made by Hobie. The adapter features a valve plunger depressor so that you can keep your valve in the closed position while you inflate. This will allow the valve to immediately close when you finish inflating and pull away your hose. Also a garden hose gasket can be put on the adapter nozzle end to improve the seal to your inflatable. The thread dimensions are 4mm from one peak to the next, 1.5mm high, on a 19mm diameter shaft. When 3D printing, consider using a wall thickness of 4 as the part is a little thin. Designed to be printed with no supports necessary with the threaded end on the build plate.
Statistics
Likes
1
Downloads
1