IKEA Lack enclosure (spool inside)
Description
I made this remix because I didn't want to unmount the spool from the printer. I need to make a lot of mod to my SV06, so I decided to keep the spool in place and not cut the filament every time I would have to remove the top of the enclosure (pretty often until now). Also, I didn't find the screws that Dominik Císař used, so I adapt all the holes to the ones I found. **Hardware:** + n°12 flat-head wood screws 5x20mm + n°20 flat-head wood screws 6x50mm *All the bigger screws are going to be placed inside the already drilled holes that you will find in the table's parts.* The main idea is that I use another Lack's legs to build a higher top part of the enclosure. The connection is made with the extender parts. There are 3 different models of this extender because they have a seat for the plexiglass. **Plexiglass panels:** + n°3 440 x 845mm thickness 3mm + n°2 220 x 845mm thickness 3mm I have coupled this with my [PSU holder for Sovol SV06](https://www.printables.com/it/model/548618-sovol-sv06-psu-holder-for-ikea-enclosure). For more precise mounting instructions check the [original model](https://www.printables.com/it/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr). [Here](https://www.rookiebwoy.eu/projects/sv06-upgrades/sv06-upgrades.html) you can find all the mods I've made to my SV06.
Statistics
Likes
1
Downloads
5