large cable ( Drag ) chain for vacuum hose and wire
Description
I got tired of trying to find a solution to manage the cables and hoses on my lowrider v3. So I designed this low cost cable chain the idea is for the chain to be inexpensive and modular, assemble the whole chain and put it into place, then remove the side and load the wire. . I have included the f3d file. The chain plates are 3d printed with pla plus 18% infill with 0.4 nozzle .2mm layer height on vzbot. NO supports needed. the sides are laser cut out of hardboard that is about $12 per sheet The screws are #7 x 7/16 pan framer screws with sharp point frome lowes It has been running for 8 hours continuous with no signs of problems https://youtu.be/LndAm1C__gw
Statistics
Likes
1
Downloads
5