Meta Quest 3 Controller Mounts (Sanlaki style, top-side mounting)
Description
[Quest 3 right controller]: https://www.thingiverse.com/thing:6267113 [paul_delta]: https://www.thingiverse.com/paul_delta/designs [Magnetic Gunstock (Modified & Optimized)]: https://www.thingiverse.com/thing:5902359/edit These are remix-ready controller mounts for the Meta Quest 3 VR headset, w/o any additions, just the mounts. I did design the mounts for my Sanlaki gunstock remix [Magnetic Gunstock (Modified & Optimized)], but they can be used for various kind of controllers. Feel free to use this design for your remix. The mounts have been created using the model [Quest 3 right controller] from [paul_delta], providing a perfect fit. There is no screwing required or whatsoever, one model per controller mount. *** ### Assembly Use one-side adhesive and very thin rubber pads or tape (1,5mm thickness) for optimal stability, as shown in the pictures. With two of these pads the controller fits super-tight. *** ### Print settings 0.4mm nozzle and 0.2mm resolution works. Anyhow I would recommend 0.15mm resolution for better visual results. I did use 20% gyroid infill and did print with Tough PLA. No problems, very stable. I did print with supports, due to the complex geometry with overhangs. I would recommend a brim for better adhesion of first layer.
Statistics
Likes
2
Downloads
5